When you create a waypoint, the system automatically assigns it a name, symbol and group. You can change these details and add comments if required. This is particularly useful if you are managing large groups of waypoints. You can select different waypoint symbols to differentiate between groups of waypoints fishing or diving locations, for example.
When a waypoint is active being navigated to it is highlighted by a red box placed around the symbol. Use the trackpad to select the waypoint to be edited. Make any changes you require. Press OK to save your changes.
You can sort the waypoint list to make it easier to manage. This is particularly useful if you have a large number of waypoints. Select a sort method from the list. The waypoint list is sorted into the selected option. If you move a waypoint that is used in a route, the new position will be updated within the route. Make sure that this does not present a navigation hazard. You can move the position of any waypoint, except an active one.
There are two methods of moving a waypoint, either by dragging it into a new position using the cursor, or, changing its co-ordinates within the waypoint list. Use the trackpad to place the cursor over the waypoint to be moved.
Use the trackpad to move the cursor and waypoint to the required position. Edit the coordinates as required. Press OK to save the new details. You can erase any waypoint, except the active waypoint or one that is part of a saved route. If you try to erase a waypoint from a hidden route, a warning message will be displayed.
Use the trackpad to place the cursor over the required waypoint. Press OK to confirm. Use the trackpad to select the waypoint from the list. Press OK to confirm the deletion. The waypoint is deleted. To make waypoints easier to manage, you can organize them into different groups. When fishing, for example, you can choose to see only the waypoints in a fishing group that includes all of your good fishing sites.
The waypoints group list appears. Open the waypoint group list. Highlight the waypoint you want to move. Press OK when done. Highlight the group you want to rename. When you delete a waypoint group, the group name and all the associated waypoints are erased from the system.
If a group contains one or more waypoints that you want to keep, move these waypoints out of the group as detailed on page 35 , before deleting the waypoint group. You can erase any waypoint group, except the following:. Select the group you want to erase. The chart application of the A-Series Multifunction Display provides navigation, hazard awareness and planning features. Using the chart application you can establish your position, navigate using waypoints and routes, record your.
Always check that your route is safe. Use the RANGE button to zoom in and check for hazards that may not be visible on a larger scale view. Practice harbor and coastal navigation during daylight hours and in clear weather conditions. You can also use the simulator mode to gain experience in using your display unit. Before you use the chart application make sure you have read and understand Chapter 3:Waypoints. Your current position is represented by a boat symbol.
If your position is outside the area of chart currently shown in the chart window, the vessel symbol will not be visible. You can tell the system to locate your vessel and centre the chart display about it. Note: Remember that the cartographic detail available on the chart will vary according to the chart and chart scale. Some charts provide details at smaller scales than others.
If you select a chart scale that does not have cartographic detail in some areas, the chart will automatically use the most detailed level available for the surrounding area and stretch it to fit the selected scale. However, there may be some misalignment of objects which cross the chart boundary in this area. This is the simplest way of using the chart application for navigation. A specific point can be either the cursor position or a waypoint contained in the waypoint list.
Use the trackpad to move the cursor to the required position. Press the GOTO softkey. A temporary waypoint is placed at the cursor position and data sent to the autopilot if attached as part of the system. Move the cursor over the required waypoint. Select the waypoint you want to navigate to. With auto range mode the chart automatically adjusts the visible range to maintain both your boat and the target waypoint on screen, using the largest scale possible.
A route is a series of waypoints used to navigate a course. A route is represented on-screen by a series of waypoints linked together by a line. Route name Sunday Trip. Up to routes can be added to your unit, each consisting of up to 50 waypoints. Move the cursor to the position that the waypoint is required.
Repeat steps 3 and 4 until you have built the set of waypoints needed to make the route. Highlight the waypoint that you want to use in the new route. From the waypoint list, select the first waypoint to be used in the route. Continue to select waypoints until your route is complete. The waypoint and its associated dotted line is removed from the chart and the cursor moves back to the previous waypoint. Use the trackpad to highlight the waypoint to be removed from the route list.
If a quick route already exists, saving the new route will overwrite the existing quick route. The Save Route Dialog box appears. Press OK to accept the changes. See Building a route on page When you begin to follow a route it becomes Active. Move the cursor over either the route line or waypoint symbol.
On the Route List menu, select the route you want to follow. This option reverses the waypoints in a route, i. The route name moves to what is now the first waypoint and the system automatically activates the reverse follow route function.
The route list appears. Use the trackpad to highlight and select the route you want to follow. As your boat approaches a waypoint arrival alarm provides a warning dialog and an alarm sound. You can set the approach distance radius at which the waypoint arrival alarm will sound.
Refer to Alarm Setup Menu on page You can tell the system to ignore the next waypoint in your route, and advance directly to the waypoint after it. Either, use the trackpad to move the cursor over the route, or press the GOTO softkey. It is possible to edit an active route with the exception of the target waypoint.
If a waypoint becomes the target during an edit, the system automatically cancels the edit and the waypoint retains its original position and data. The routes list appears. Use the trackpad to highlight the route to be edited.
Use the trackpad to move the cursor over the route to be edited. The waypoint list appears. Use the trackpad to highlight the position for the added waypoint in the right hand column. Use the trackpad to highlight the waypoint you want to add to the route in the left hand column. Use the trackpad to move the cursor over the route that you want to add a waypoint to. Use the trackpad to move the cursor to the position of the new waypoint.
Use the trackpad to move the cursor over the waypoint to be moved. Use the trackpad and cursor to drag the waypoint to its new position. Use the trackpad to move the cursor over the waypoint to be removed. If you have many routes stored in your system, it can be useful to give them individual names or mark them with a color. Any route stored in the route list can be erased, with the exception of the one that you are following.
Erasing a route will only delete the waypoints used by that specific route. Waypoints used within other routes are not affected. Use the trackpad to highlight the route to be erased. Details of all routes are held in the routes list. This list can be used in conjunction with the time and speed over ground SOG options to show a journey time or estimated time of arrival ETA and the actual or planned SOG.
Either use the trackpad to move the cursor and highlight a route on-screen, or, highlight a route in the routes list. Open the Select Page Set menu. Select a page set that includes the CDI application. Press OK to confirm your selection. The steering instructions below the rolling road tell you what correction is needed to maintain your course and arrive at the target waypoint.
Indicator-arrows either side of the steering instruction pointing towards the centre line tell you how great or small the error is. The greater the error, the greater the number of arrows. Whilst following a route or navigating to a waypoint, it is possible to restart the cross track error XTE.
The restart XTE function is useful if you find that you are off track and want to travel directly to the target waypoint, rather than return to the original track. Although restarting the XTE causes your boat to change course, it does not change the saved route. Welcome to ManualMachine. We have sent a verification link to to complete your registration.
Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Contents Important information Split screen pages Creating a route Chapter D chart application Presentation options Tropical storm data Chapter 9:Navtex Messages and alarms Contacting Raymarine Unauthorized repair may affect your warranty.
DO NOT use commercial high pressure washing jet wash equipment. Important information 9. Electronic charts Electronic charts are an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Alternatively anywhere in North America call Navionics toll-free on: EMC conformance All Raymarine equipment and accessories are designed to the best industry standards for use in the leisure marine market.
Declaration of conformity Raymarine Ltd. Whilst the WEEE Directive does not apply to some Raymarine products, we support its policy and ask you to be aware of how to dispose of this product. Warranty To register your Raymarine A-Series Multifunction Display ownership, please take a few minutes to fill out the warranty registration card found in the box, or visit www. About this manual This handbook contains important information on the operation and maintenance of all of these models and variants which are intended for use on leisure marine boats and workboats not covered by International Maritime Organization IMO and Safety of Life at Sea SOLAS Carriage Regulations.
Technical accuracy To the best of our knowledge, the information in this handbook was correct as it went to press.
Important information Chapter 2: Using the display This chapter gives details of the general operation of the A-Series display. Extended System Your A-Series may connect to other equipment, for example to share data. Chapter 2: Using the display Data 2. Select a page set. To Select a page set at first time Power on: 1. D Highlight appropriate pre-configured page set 2.
Press OK when complete. Simulator Your A-Series display includes a simulator mode that enables you to practice operating the unit without data from a GPS antenna or transducer unit. Select the Simulator option 5. Also used to scroll through menus. Press and release to display the on-screen option when editing data.
OK Also used to return to the previous Press to select an on-screen Press again to place a waypoint softkey or menu level. Press and hold to access the Setup menu.
The function identified by the on-screen selected screen is outlined Press and release to turn ON. Cursor appearance The cursor appears on the screen as a white cross. D The cursor is context-sensitive; when it is placed over an object, e. Placing the cursor over certain items will also cause the softkeys to change, enabling you to access related operations. Cursor When you are using chart and fishfinder applications, the cursor is used to move around the screen.
To move the cursor: Press the trackpad in the direction you want the cursor to move. Panning and zooming In the appropriate chart or fishfinder application windows, you can pan and zoom the view to show a different geographic area pan or change the scale at which an area is displayed zoom. To Pan the view Use the trackpad to move the cursor to the edge of the screen, The view automatically moves in the selected direction to bring a different area into view.
Display lighting and color Your display unit has two distinct color palettes, for day or night operation. Backlight level To adjust the backlight level: 1. Compass bar The compass bar gives you a continuous readout centred on your current heading or course over ground COG. You turn the compass bar on and off from the data toolbar. To turn the compass bar on and off 1. Press the trackpad right to open Databar setup menu 4.
Setup menus Menus are provided for you to make system or application changes. To use the Setup menus 1. Chart Display Detailed Cartography Setup Chart Text On Compass Setup Select item, using: Trackpad right Application setup menus are context sensitive: if you are in the chart application, for example, the chart setup menu is available. See also For full details of the setup menus and available settings refer to System Setup and Customizing on page Dialog boxes Dialog boxes are provided for you to edit or enter data.
To enter data into a dialog box 1. Select the appropriate field. Enter the data. Press OK to save the changes. Selecting a page set To select a page set: 1. Highlight appropriate pre-configured page set Selecting an application page Once you have selected the appropriate page set, as detailed above, choose the application page that you want to use.
To view an application page: 1. Split screen pages When the selected page has more than one application, the window that is currently active has a red border. When selecting between active windows, the toolbar changes accordingly. Active window highlighted Soft keys associated with active window To change the active window 1.
To toggle between split and single window views 1. See Page sets on page A-Series display - User reference manual. Man overboard If you lose a person or object overboard and need to return to the spot, activate the Man Overboard MOB function immediately. To activate the Man Overboard function 1.
To cancel an MOB alarm: 1. Alarms Alarms are used to alert you of a hazard or particular situation. Cancelling an alarm There are two types of alarms; system and external. Both types of alarm are cancelled in the same way. To cancel an alarm: 1. See also You can configure the alarm types and settings for your display. Chapter 3: Waypoints 3 This chapter introduces waypoints and explains how to use them for navigation with your A-Series Multifunction Display.
Waypoints can be created in any application and displayed on the chart and fishfinder windows. WPT The active waypoint i. Explore more Raymarine A Series transducer options. Find your nearest Raymarine dealer now. Cable Management Cable management system keeps cables neat, tidy and out of sight. Raymarine A Series Transducers Installing the right depth transducer is vital to getting the most out of your fishfinder. Locate your Raymarine dealer Purchase this product from your local Raymarine dealer.
A Series. Explore Features. Ordering Info. Garmin Compass FTC Garmin Compass P Charts EUS. See 6 more pictures. Your Price:. Use optional Navionics Gold or Platinum charts. Additional transom, in-hull, trolling motor and thru-hull transducer options available. Collision Avoidance: Safe zones and safety messages. Alarms: Local alarm messages, lost targets. Set up a safe zone. Chartplotter Waypoints: Waypoints with 16 character names.
Additional waypoint storage available on CompactFlash cards. Relative, Autorange or True Motion. Screen offset. Routes: routes with 50 waypoints per route. Additional routes can be stored CompactFlash cards Track History: Ability to record the current track with a maximum of 10, trackpoints, or save up to 10 tracks with up to trackpoints in each stored in the units internal memory.
Bearing and distance to waypoint. Pre-defined engine, engine and fuel, fuel resources, engine and resources, twin engines or triple engine support or user-configured. Product Videos.
0コメント